Component Type: kbuild config

Description: I2C EEPROMs / RAMs / ROMs from most vendors

More info: Enable this driver to get read/write support to most I2C EEPROMs and compatible devices like FRAMs, SRAMs, ROMs etc. After you configure the driver to know about each chip on your target board. Use these generic chip names, instead of vendor-specific ones like at24c64, 24lc02 or fm24c04: 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024, 24c2048 Unless you like data loss puzzles, always be sure that any chip you configure as a 24c32 (32 kbit) or larger is NOT really a 24c16 (16 kbit) or smaller, and vice versa. Marking the chip as read-only won't help recover from this. Also, if your chip has any software write-protect mechanism you may want to review the code to make sure this driver won't turn it on by accident. If you use this with an SMBus adapter instead of an I2C adapter, full functionality is not available. Only smaller devices are supported (24c16 and below, max 4 kByte). This driver can also be built as a module. If so, the module will be called at24.

Build project: Kconfig (Linux kconfig) (Path: drivers\misc\eeprom\Kconfig )

Other views: file explorer