Component Type: kbuild config

Description: Enable CAP mode packet interface

More info: ARCnet "cap mode" packet encapsulation. Used to get the hardware acknowledge back to userspace. After the initial protocol byte every packet is stuffed with an extra 4 byte "cookie" which doesn't actually appear on the network. After transmit the driver will send back a packet with protocol byte 0 containing the status of the transmission: 0=no hardware acknowledge 1=excessive nak 2=transmission accepted by the receiver hardware Received packets are also stuffed with the extra 4 bytes but it will be random data. Cap only listens to protocol 1-8.

Build project: Kconfig (Linux kconfig) (Path: drivers\net\arcnet\Kconfig )

Other views: file explorer